Product ID:BRA542 INTERCLENE ANTIFOULING BLACK
MSDS Date:06/05/1992
FSC:8010
NIIN:01-241-9735
MSDS Number: BQCYZ

INTERNATIONAL PAINT CO INC

2270 MORRIS AVE
UNION, NJ 07083-5704
US

Emergency Phone: 201-686-1300

Info Phone: 201-686-1300

Cage: 26351

INTERNATIONAL PAINT INC

HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

N-BUTYL ALCOHOL (1-BUTANOL) (SARA 313) (VAPOR PRESSURE 4.0

CAS: 71-36-3

RTECS: EO1400000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM

ACGIH TLV: S, C 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

XYLENES (O-,M-,P- ISOMERS) (SARA III) VAPOR PRESSURE @

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 15-20%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL;9394

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

CUPROUS OXIDE (COPPER OXIDE (CU20) (SARA 313)

CAS: 1317-39-1

RTECS: GL8050000

Fraction By Weight: 35-40%

OSHA PEL 1.00 MG/M3

ACGIH TLV: 1.00 MG/M3

POLYAMIDE RESIN

CAS: 68410-23-1

Fraction By Weight: 1-5%

ZINC OXIDE (SARA 313)

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 10-15%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-MAY BE HARMFUL IF INHALED,
ABSORBED THROUGH SKIN, OR INGESTED. MAY CAUSE IRRITATION OF
RESPIRATORY TRACT, EYES, AND SKIN. CORROSIVE TO EYES, MAY CAUSE
IRRIVERSIBLE EYE DAMAGE INHALATION OF ZINC FUMES MAY PRODUCE METAL
FEVER. CHRONIC:DERMATITIS, BRAIN AND CNS DAMAGE. TARGET ORGANS:
LUNGS, BRAIN, SKIN, CNS.
Effects of Overexposure:EYES: SEVERE IRRITATION, REDNESS, TEARING AND
BLURRED VISION. SKIN: IRRITATION. INHALATION: SEVERE IRRITATION,
DIZZINESS, POSSIBLE NAUSEA, VOMITING AND UNCONSCIOUSNESS.
INGESTION: GASTROINTESTINAL IRR ITATION, NAUSEA, VOMITING, DIARRHEA
ANDUNCONSCIOUSNESS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid:EYES: FLUSH IMMED W/COPIOUS QUANTITIES OF WATER-15 MIN. GET
MEDICAL ATTN IMMEDIATELY. SKIN: REMOVE CONTAMINATED CLOTHING, WASH
SKIN WITH PLENTY OF SOAP & WATER. LAUNDER CLOTHES BEFORE REUSE.
INHALATIO N: REMOVE TO FRESH AIR. GIVE ARTIFICIALRESPIRATION IF
NEEDED. GET MEDICAL ATTENTION. INGESTION: GET MEDICAL ATTN
IMMEDIATELY. DRINK PROMPTLY MILK, EGG WHITES, GELATIN SOL'N OR
WATER. AVOID ALCOHOL.

Flash Point Method:CC
Flash Point:80.0F,26.7C
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:SMOTHER FLAMES WITH EXTINGUISHING MEDIA. USE
WATER ONLY TO COOL UNOPEN CNOTAINERS. WEAR SELF-CONTAINED BREATHING
APPARATUS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPODE IN THE HEAT
OF FIRE. FIRE OR EXCESSIVE HEAT MAY CAUSE PRODUCTION OF HAZARDOUS
DECOMPOSITION PRODUCTS.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH INERT ABSORBENT
MATERIALS.

Handling and Storage Precautions:STORE IN BUILDING FOR LIQUIDS WITH
NFPA CLASS. AVOID BREATHING DUST FROM SANDING SURFACES COATED WITH
THIS PRODUCT.
Other Precautions:USE IN A WELL VENTILATED AREA. DO NOT INHALE
VAPORS/FUMES. WEAR DUST MASK WHEN SANDING OR GRINDING CURED
PRODUCT.

Respiratory Protection:IN OPEN AREAS-USE NIOSH APPROVED FILTER
RESPIRATOR TO REMOVE SOLID AIR-BORNE PARTICLES DURING SPRAY
APPLICATIONS. IN RESTRICTED AREAS-USE NIOSH APPROVED RESPIRATOR IN
ACCORD W/29 CFR 1910.134 TO REMOV E A COMBINATION OF PARTICULATES &
VAPORS
Ventilation:PROVIDE SUFFICIENT VENTILATION TO KEEP TLV AND LEL OF
HAZARDOUS INGREDIENTS BELOW LIMITS.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GLASSES/CHEMICAL GOGGLE/FACE SHLD
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
THIS MSDS REVIEWED BY DGSC-SHH FOR GSA.

HCC:F3
Boiling Pt:B.P. Text:244F,118C
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NO INFO GIVEN BY MFR
Percent Volatiles by Volume:24

Stability Indicator/Materials to Avoid:YES
MOISTURE, OXIDIZING AGENTS.
Stability Condition to Avoid:KEEP DRY. STORE AWAY FROM DIRECT HEAT,
FLAME OR SPARK.
Hazardous Decomposition Products:CO, CO2, VARIOUS HYDROCARBON
FRAGMENTS, NITROGEN COMPOUNDS, ZINC AND COPPER FUMES.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.